Real-time recursive estimation of statistical parameters

Recursive algorithms for the computation of standard deviation and average deviation are derived and their applications in data acquisition are discussed. The relative speeds and accuracies of the two algorithms are compared for synthetic data. The performance of recursive estimation under shot and proportional noise limitations is also described. As an example of the utility of these algorithms, absorbance data with constant confidence intervals are collected regardless of incident and transmitted intensities. The desired precision is specified prior to data acquisition and used to control signal-averaging of the data in real time.     

关于《线性代数》教材改革的几点想法

随着现代科学技术的迅猛发展,尤其是计算机技术的广泛应用,我们应当在工科数学课程的教学内容、教学方法和教学手段上积极改革,与时俱进,以改进教学方法,提高教学质量,使得工科学生能借助于计算机,学好本专业所需的数学知识.在这篇短文中,我们想就《线性代数》的教学内容的改革     

分光光度法研究铝制品对水样溶出铝含量的影响

采用分光光度法,在pH为3-4的酸度条件下,以二甲酚橙为显色剂,快速检测水样中微量铝的含量.研究了不同情况下不同铝制品对水样溶出铝含量的影响.结果表明:水样在铝制品中放置时间越长,从铝制品中溶解出的铝越多,而且薄的铝制品中溶出的铝要比铝合金锅中溶出的多;当在水中加入一定量的食盐后,由铝制品中溶解出的铝含量明显增多.本方法简便快速,灵敏度高,对样品测定的结果令人满意.     

P schl-Teller势阱中线性与非线性光学折射率变化

利用量子力学中的密度矩阵算符理论导出了P schl-Teller势阱中的线性与三阶非线性光学折射率的解析表达式。P schl-Teller势阱中有两个可调参数κ和λ,势阱的形状及其非对称性会随势阱参数的取值不同而明显不同,从而其线性与非线性光学折射率变化的大小也会随势阱参数和入射光强的变化而呈规律性的变化。文章以典型的GaAs/AlGaAs势阱为例作了数值计算,数值计算结果表明,势阱的形状和入射光强对光学折射率有着重要的影响。     

共振光散射法测定环境水样中痕量锡

基于在Tris-HCl介质中,痕量锡对氯酚红-人血白蛋白-十二烷基硫酸钠体系的共振散射光谱有明显的猝灭作用;考察了它们的光谱特征、影响因素和适宜的反应条件;确定了散射光强度与Sn2 的关系,从而建立了测定痕量锡的共振光散射新方法.该法在室温下进行,操作方便,灵敏度高和选择性好.其线性范围为0.2-4.0μg/L,检出限0.12μg/L,用于环境水样中痕量Sn2 的测定,相对标准偏差小于3.1%,加标回收率为95.5%-100.5%,效果良好.     

微波消解-氢化物发生-原子荧光光谱法测定7种中草药中砷

利用原子荧光光谱法测定7种驱虫类中草药中的砷.实验采用微波消解样品,以盐酸为测定介质,硫脲-抗坏血酸为预还原剂,硼氢化钾为氢化剂,用氢化物发生-原子荧光光谱法测定砷含量.砷含量在10-100ng/mL浓度范围内线性关系好(r2=0.9924).回收率为93.83%-110.94%之间.方法简便、快速、灵敏、准确,可用于中草药中砷的测定.     

原子吸收光谱法测定铅蓄电池板栅中锡、钙和铝

通过先加酒石酸、硝酸溶解样品,用氧化镧、EDTA联合掩蔽铝来测定钙,盐酸沉淀铅后测锡、铝的试验,采用火焰原子吸收光谱法测定锡、钙和铝.     

High-throughput experimentation in synthetic polymer chemistry: From RAFT and anionic polymerizations to process development

The application of combinatorial and high-throughput approaches in polymer research is described. An overview of the utilized synthesis robots is given, including different parallel synthesizers and a process development robot. In addition, the application of the parallel synthesis robots to reversible addition fragmentation termination (RAFT) radical polymerizations and ionic copolymerizations is overviewed. Moreover, first results concerning the process development of semi-batch free radical polymerizations are described.     

Surface structures formed by individual adsorption and coadsorption of Mn and Bi on Cu(0 0 1), studied by LEED

We have studied the individual adsorption of Mn and Bi, and their coadsorption on Cu(0 0 1) by low-energy electron diffraction (LEED). For Mn, we have determined the c(2 × 2) structure formed at 300 K, whose structure had been determined by several methods. We reconfirmed by a tensor LEED analysis that it is a substitutional structure and that a previously reported large corrugation (0.30 Å) between substitutional Mn and remaining surface Cu atoms coincides perfectly with the present value. In the individual adsorption of Bi, we have found a c(4 × 2) structure, which is formed by cooling below ∼250 K a surface prepared by Bi deposition of ∼0.25 ML coverage at 300 K where streaky half-order LEED spots appear. The c(4 × 2) structure has been determined by the tensor LEED analysis at 130 K and it is a substitutional structure. In the coadsorption, we found a c(6 × 4) structure, which has been determined by the tensor LEED analysis. It is very similar to the previously determined structure of the c(6 × 4) formed by coadsorption of Mg and Bi, and embedded MnBi₄ clusters are arranged in the top Cu layer instead of MgBi₄. Large lateral displacements of Bi atoms in the c(6 × 4)-(Mn + Bi) suggest that the Mn atoms undergo the size-enhancement caused by their large magnetic moment.     

NA序列部分和的矩完全收敛性

讨论了NA序列部分和的矩完全收敛性,在一定条件下获得了NA序列矩完全收敛的充要条件,显示了矩完全收敛和矩条件之间的关系,将独立同分布随机变量序列矩完全收敛的结果推广到NA序列,得到了与独立随机变量序列情形类似的结果.